Difference between revisions of "EPower"
From Enterprise Wiki
m (→Installing the module) |
m (→Bill of materials (BOM)) |
||
(16 intermediate revisions by the same user not shown) | |||
Line 9: | Line 9: | ||
* 5 V @ 1.5 A channel A, | * 5 V @ 1.5 A channel A, | ||
* 5 V @ 1.5 A channel B. | * 5 V @ 1.5 A channel B. | ||
− | The current limitation of the 5 V stabilizer is set at 3.7 A [I = 37125 / R1] (the maximum possible current is 7 A, if need, but it could damage the | + | The current limitation of the 5 V stabilizer is set at 3.7 A [I = 37125 / R1] (the maximum possible current is 7 A, if need, but it could damage the circuity of the computer). |
+ | |||
+ | Maximum values (limited by used components) are: | ||
+ | * 12 V @ 1.0 A, | ||
+ | * 5 V @ 2.3 A per channel (both 5A+5B @ 4.5 A). | ||
+ | This is much more than the original power source (12 V @ 0.15 A and 2x 5 V @ 1 A). | ||
− | |||
− | |||
− | |||
− | |||
=How to install= | =How to install= | ||
The author has made every effort to make the module as reliable and safe to use as possible. However, | The author has made every effort to make the module as reliable and safe to use as possible. However, | ||
Line 47: | Line 48: | ||
* R15 (1.5 kΩ) | * R15 (1.5 kΩ) | ||
* R16 (3.9 kΩ) | * R16 (3.9 kΩ) | ||
− | |[[File:desoldering.png|250px]]<br><center> | + | | [[File:desoldering.png|250px]]<br><center>Remove these components</center> |
− | |[[File:removed.jpg|250px]]<br><center> | + | | [[File:removed.jpg|250px]]<br><center>Desoldered components</center> |
− | |[[File:EPprepared.jpg|250px]]<br><center>Prepared mainboard</center> | + | | [[File:EPprepared.jpg|250px]]<br><center>Prepared mainboard</center> |
|} | |} | ||
Line 55: | Line 56: | ||
{| | {| | ||
| | | | ||
− | The module pins are matched to holes after the components: | + | The module pins are matched to holes left after the components: |
* D2 (both holes), | * D2 (both holes), | ||
* TR3 (ground), | * TR3 (ground), | ||
Line 72: | Line 73: | ||
| [[File:EPower_pins.jpg|200px]]<br><center>Cut the excess of pins</center> | | [[File:EPower_pins.jpg|200px]]<br><center>Cut the excess of pins</center> | ||
| [[File:EPower_inside.jpg|250px]]<br><center>Installed EPower module</center> | | [[File:EPower_inside.jpg|250px]]<br><center>Installed EPower module</center> | ||
+ | |} | ||
+ | |||
+ | =How to make the EPower= | ||
+ | ==Scheme== | ||
+ | [[File:EPower_scheme.png|200px]] | ||
+ | ==PCB== | ||
+ | * Gerber files [[https://enterpriseforever.com/hardware/enterprise-power-module-epower/?action=dlattach;attach=20940 EPower.gbr.zip]] | ||
+ | [[File:EPower_pcb.png|200px]] | ||
+ | ==Bill of materials (BOM)== | ||
+ | {|class="wikitable" | ||
+ | !RefDes | ||
+ | !Name | ||
+ | !Value | ||
+ | |- | ||
+ | | +9||TESTPOINT|| | ||
+ | |- | ||
+ | | +12||TESTPOINT|| | ||
+ | |- | ||
+ | | +5A||TESTPOINT|| | ||
+ | |- | ||
+ | | +5B||TESTPOINT|| | ||
+ | |- | ||
+ | | 0V||TESTPOINT|| | ||
+ | |- | ||
+ | | C1||CAP_0805||10 nF | ||
+ | |- | ||
+ | | C2||CAP200RP||220 µF / 25 V | ||
+ | |- | ||
+ | | C3||CAP200RP||15..22 µF / 25 V | ||
+ | |- | ||
+ | | C4||CAP200RP||15..22 µF / 25 V | ||
+ | |- | ||
+ | | C5||CAP200RP||15..22 µF / 25 V | ||
+ | |- | ||
+ | | C6||CAP_0805||470 nF | ||
+ | |- | ||
+ | | C7||CAP_0805||1 nF | ||
+ | |- | ||
+ | | C8||CAP200RP||180..220 µF / 10 V (low ESR) | ||
+ | |- | ||
+ | | C9||CAP200RP||180..220 µF / 10 V (low ESR) | ||
+ | |- | ||
+ | | C10||CAP200RP||220 µF / 25 V (low ESR) | ||
+ | |- | ||
+ | | C11||CAP200RP||220 µF / 10 V | ||
+ | |- | ||
+ | | C12||CAP_0805||100 nF | ||
+ | |- | ||
+ | | C13||CAP_0805||330 nF | ||
+ | |- | ||
+ | | D1||C3D08060G||6 A Schottky diode | ||
+ | |- | ||
+ | | D2||S1A||1 A universal diode | ||
+ | |- | ||
+ | | D3||S1A||1 A universal diode | ||
+ | |- | ||
+ | | D4||SK110||1 A Schottky diode | ||
+ | |- | ||
+ | | E1||EMIFIL||MURATA NFM21PC475B1A3D | ||
+ | |- | ||
+ | | E2||EMIFIL||MURATA NFM21PC475B1A3D | ||
+ | |- | ||
+ | | E3||EMIFIL||MURATA NFM21PC104R1E3D | ||
+ | |- | ||
+ | | L1||DE_1207||22 µH @ 4.7 A | ||
+ | |- | ||
+ | | L2||DE_0704||22 µH @ 2.3 A | ||
+ | |- | ||
+ | | L3||DE_0704||22 µH @ 2.3 A | ||
+ | |- | ||
+ | | L4||DE_0704||15 µH @ 1.4 A | ||
+ | |- | ||
+ | | L5||DE_0704||15 µH @ 1.4 A | ||
+ | |- | ||
+ | | R1||RES_0805||10 kΩ (current output limiter) | ||
+ | |- | ||
+ | | R2||RES_0805||3 kΩ | ||
+ | |- | ||
+ | | U1||LM2679T-5|| | ||
+ | |- | ||
+ | | U2||LM2585S-12|| | ||
|} | |} | ||
=Links= | =Links= | ||
Thread on the Enterprise Forever forum [https://enterpriseforever.com/hardware/enterprise-power-module-epower/ Enterprise Power module - EPower] | Thread on the Enterprise Forever forum [https://enterpriseforever.com/hardware/enterprise-power-module-epower/ Enterprise Power module - EPower] | ||
+ | =Manual in other languages= | ||
+ | [[EPower (Spanish)|Español]] | ||
+ | |||
+ | [[EPower (Polski)|Polski]] | ||
+ | |||
+ | [[EPower (Deutsch)|Deutsch]] | ||
+ | |||
+ | [[EPower (Magyar)|Hungarian]] |
Latest revision as of 14:07, 5 June 2018
Contents
Brief information
The EPower module replaces the original Enterprise power circuits.
Specification
The module has three power sources:
- 12 V @ 0.7 A,
- 5 V @ 1.5 A channel A,
- 5 V @ 1.5 A channel B.
The current limitation of the 5 V stabilizer is set at 3.7 A [I = 37125 / R1] (the maximum possible current is 7 A, if need, but it could damage the circuity of the computer).
Maximum values (limited by used components) are:
- 12 V @ 1.0 A,
- 5 V @ 2.3 A per channel (both 5A+5B @ 4.5 A).
This is much more than the original power source (12 V @ 0.15 A and 2x 5 V @ 1 A).
How to install
The author has made every effort to make the module as reliable and safe to use as possible. However,
You make any modifications inside of your equipment at your own risk !
What you need
- EPower module
- screwdriver
- soldering iron
- tin extractor
- solder tin
- pliers
Enterprise mainboard preparation
The following components should be desoldered from the motherboard:
Installing the module
How to make the EPower
Scheme
PCB
- Gerber files [EPower.gbr.zip]
Bill of materials (BOM)
RefDes | Name | Value |
---|---|---|
+9 | TESTPOINT | |
+12 | TESTPOINT | |
+5A | TESTPOINT | |
+5B | TESTPOINT | |
0V | TESTPOINT | |
C1 | CAP_0805 | 10 nF |
C2 | CAP200RP | 220 µF / 25 V |
C3 | CAP200RP | 15..22 µF / 25 V |
C4 | CAP200RP | 15..22 µF / 25 V |
C5 | CAP200RP | 15..22 µF / 25 V |
C6 | CAP_0805 | 470 nF |
C7 | CAP_0805 | 1 nF |
C8 | CAP200RP | 180..220 µF / 10 V (low ESR) |
C9 | CAP200RP | 180..220 µF / 10 V (low ESR) |
C10 | CAP200RP | 220 µF / 25 V (low ESR) |
C11 | CAP200RP | 220 µF / 10 V |
C12 | CAP_0805 | 100 nF |
C13 | CAP_0805 | 330 nF |
D1 | C3D08060G | 6 A Schottky diode |
D2 | S1A | 1 A universal diode |
D3 | S1A | 1 A universal diode |
D4 | SK110 | 1 A Schottky diode |
E1 | EMIFIL | MURATA NFM21PC475B1A3D |
E2 | EMIFIL | MURATA NFM21PC475B1A3D |
E3 | EMIFIL | MURATA NFM21PC104R1E3D |
L1 | DE_1207 | 22 µH @ 4.7 A |
L2 | DE_0704 | 22 µH @ 2.3 A |
L3 | DE_0704 | 22 µH @ 2.3 A |
L4 | DE_0704 | 15 µH @ 1.4 A |
L5 | DE_0704 | 15 µH @ 1.4 A |
R1 | RES_0805 | 10 kΩ (current output limiter) |
R2 | RES_0805 | 3 kΩ |
U1 | LM2679T-5 | |
U2 | LM2585S-12 |
Links
Thread on the Enterprise Forever forum Enterprise Power module - EPower