EnterMice

From Enterprise Wiki
Revision as of 16:42, 25 November 2015 by Pear (talk | contribs) (Important)

Jump to: navigation, search
EnterMice

Joysticks & PS/2 Mouse Interface
for Enterprise 64 & 128 computer

Introduction

The interface is designed for the computers Enterprise 64/128.
It enables direct connection of two joysticks in Atari standard without additional adapters. In addition, you can use the PS/2 mouse.
EnterMice is based on solutions used in the BoxSoft interface, which used a Neos or MSX mouse.
In one of the EnterMice operating modes it is fully compatible with BoxSoft.

General description

EnterMice front
EnterMice back

Important

Do not connect the interface to the computer when the power is on !
If your computer when you connect the interface does not start up properly or behaves abnormally, it must be switched off immediately !

Check whether the interface is connected correctly and try again.

Mouse and joystick can be connected and disconnected while the computer is power on, but this is not recommended. It is safer to perform any connection with the power disconnected.

Connecting to a computer

Features

Troubleshooting

Technical specification

Information for developers