Difference between revisions of "EXDOS by pear"
From Enterprise Wiki
(→Brief information) |
(→Brief information) |
||
| Line 9: | Line 9: | ||
<pre style="color: red; font-size: 1.7em; font-family: calibri">Do not connect the interface to the computer when the power is on !</pre> | <pre style="color: red; font-size: 1.7em; font-family: calibri">Do not connect the interface to the computer when the power is on !</pre> | ||
| − | <pre style="color: red; font-size: 1.2em; font-family: calibri">The original power supply | + | <pre style="color: red; font-size: 1.2em; font-family: calibri">The original Enterprises power supply does not have enough power to both the computer and the card !</pre> |
If you want to use a single, common AC adapter should provide 9V voltage and current of about 3 - 4A. | If you want to use a single, common AC adapter should provide 9V voltage and current of about 3 - 4A. | ||
In the case of the power supply connected direct to the card's polarity can be any (the card has a diode bridge). | In the case of the power supply connected direct to the card's polarity can be any (the card has a diode bridge). | ||
Revision as of 06:30, 18 September 2016
Brief information
It is a clone card EXDOS. Compact version designed by pear. It includes the Bus Bridge on-board.
Jumper J9 near a power socket:
- Short: card and a EP powered with a common power supply connected to the card,
- Open: card and a computer powered with separate power supplies.
Do not connect the interface to the computer when the power is on !
The original Enterprises power supply does not have enough power to both the computer and the card !
If you want to use a single, common AC adapter should provide 9V voltage and current of about 3 - 4A. In the case of the power supply connected direct to the card's polarity can be any (the card has a diode bridge).
