Difference between revisions of "EXDOS by pear"
From Enterprise Wiki
m |
(→Brief information) |
||
Line 5: | Line 5: | ||
Jumper J9 near a power socket: | Jumper J9 near a power socket: | ||
− | * Short: card and a EP powered with a common power supply, | + | * Short: card and a EP powered with a common power supply connected to the card, |
* Open: card and a computer powered with separate power supplies. | * Open: card and a computer powered with separate power supplies. | ||
Revision as of 06:28, 18 September 2016
Brief information
It is a clone card EXDOS. Compact version designed by pear. It includes the Bus Bridge on-board.
Jumper J9 near a power socket:
- Short: card and a EP powered with a common power supply connected to the card,
- Open: card and a computer powered with separate power supplies.
Do not connect the interface to the computer when the power is on !
The original power supply EP does not have enough power to both the computer and the card !
If you want to use a single, common AC adapter should provide 9V voltage and current of about 3 - 4A. In the case of the power supply connected direct to the card's polarity can be any (the card has a diode bridge).