EPower
From Enterprise Wiki
Contents
Brief information
The EPower module replaces the original Enterprise power circuits.
Specification
The module has three power sources:
- 12 V @ 0.7 A,
- 5 V @ 1.5 A channel A,
- 5 V @ 1.5 A channel B.
The current limitation of the 5 V stabilizer is set at 3.7 A [I = 37125 / R1] (the maximum possible current is 7 A, if need, but it could damage the circuitry of the computer).
Maximum values (limited by permissible current of the power filters) are:
- 12 V @ 1.2 A,
- 5 V @ 2.5 A per channel (both 5A+5B @ 4.5[A]).
This is much more than the original power source (12[V] @ 0.15[A] and 2x 5[V] @ 1[A]).
How to install
What you need
- EPower module
- screwdriver
- soldering iron
- tin extractor
- solder tin
- pliers
Enterprise mainboard preparation
The following components should be desoldered from the motherboard:
- C8 (100 µF)
- C9 (100 µF)
- C10 (100 µF)
- C11 (100 µF)
- C12 (100 µF)
- D2 (1N4001)
- D3 (1N4001)
- D4 (1N4001)
- L1 (coil)
- U19 (LM7805)
- U20 (LM7805)
- U21 (LM78L12)
- TR2 (BC337)
- TR3 (BC212)
- R13 (100 Ω)
- R14 (10 Ω)
- R15 (1.5 kΩ)
- R16 (3.9 kΩ)
Links
Thread on the Enterprise Forever forum Enterprise Power module - EPower